william's FotoPage

By: william brown

[Recommend this Fotopage] | [Share this Fotopage]
[<<  <  4  5  6  7  8  9  10  [11]  12  13  14  15  16  17  18  >  >>]    [Archive]
Tuesday, 27-Aug-2013 15:39 Email | Share | | Bookmark
Completing Your New Fireplace Mantel

Painting or Staining?

The first decision that needs to be made is whether the new mantel will be painted or stained. Usually this decision is made prior to purchasing the mantel, as various wood types and products are utilized in producing a mantel based upon if it will be painted or stained. Stainable mantels make use of wood types known for their grain and appearance, and solid moldings, since the wood's grain will be visible. Many individuals who plan to stain wood want the grain, as well as other natural imperfections, to shine through and would never cover those natural features with paint. Paintable mantels make use of finger-jointed moldings and less-decorative wood or MDF (i.e. Medium Density Fiberboard), because the wood will not be visible. As soon as it is painted, it is really tough to determine the material used, and that is why many contractors and homeowners alike, choose MDF as an economical alternative to wood.

Setting up the Mantel.

While it is not really necessary to complete a mantel after you install it, it does make the task easier if you do this while it is on the wall, as it is similar to painting any other wood trim. If you complete it, and then afterwards, mar the mantel when putting it up, you will need to fix it. Certainly, lots of people paint or stain their fireplace mantel prior to installing it. It is truly a personal preference.

Whether painting or staining, I have created a list of pointers below to assist homeowners complete their new fireplace mantels.

Tips for Painting Your Fireplace Mantel.

I suggest using a high quality semi-gloss paint in the color of your choice, however, any paint that is used for inside house trim is suitable.

Have various size paint brushes available. You will want a smaller sized brush if your mantel has dentil molding so you can get the paint into the small crevices. A bigger brush will help you paint faster and avoid stroke marks in the paint.

Although priming your mantel is suggested, you do not need to. You can simply apply two to three coats of paint.

Tips for Staining Your Fireplace Mantel.

Test your stain color on an inside location of the mantel before you install it to ensure the color is what you want to achieve. If you will be using a polyurethane finish over the stain, I suggest testing the polyurethane on top of the stain so you can see the final look of your mantel.

If sanding the mantel, use a fine (220) grit.

If applying more than one coat of stain, be sure to let it dry prior to applying the next coat.

When your stain is dry, apply a couple of coats of polyurethane (satin or semi-gloss is recommended), or tung oil to protect your finish.

Completing a fireplace mantel is a gratifying experience, and as soon as it is done, you can see how the new mantel improves the look of the room.Visit This Website\n


Monday, 26-Aug-2013 11:19 Email | Share | | Bookmark
Know Your AC unit Components.

Essentially, the air conditioning unit works on the successive heating and cooling of a super-volatile liquid called Freon. The latter first enters the compressor and is compressed into gas form, therefore giving off heat and cooling the liquid as a result. The dispelled heat is then fanned out with the help of a rotating fan. Next, the liquid gets into the condenser and soaks up the surrounding heat to transform into vapor again. So obviously, the surroundings cool down. This whole process goes on in a cyclical pattern, therefore bringing down the temperature level in the room.

Apart from the 3 above major parts of an air conditioner, the device also has a hot coil, a cool coil, one outside fan, one interior fan, and a control circuit in it. The hot coil is put outside to dispel the heat out, and the cool coil is put inside to soak up heat. The control circuit modifies the temperature level by regulating the rotation speed of the fans with the help of a potentiometer.

Of all its parts, the compressor remains the most valuable and expensive part of an air conditioner. So, the air conditioning unit manufacturers always offer a warranty on the compressor. A compressor of superior make and quality has a long life and functions fine over years. And, if the original compressor gives you problems, it can be replaced with a brand-new one. It's simple to buy a new compressor and fit in your old air conditioning unit. However, here it is always a good idea to go for the compressor of the same brand name as that of the rest of the machine. However, the issue is that only a handful of companies make their own compressors. All the others simply buy them and install it in their air conditioning units.

The evaporator and condenser in an air conditioner can be replaced too. So can the coils, in case they break. Any troublesome coil can result in defective heat-dissipation, and lead to a major malfunctioning after that. The two fans are the most basic of air conditioning unit parts that can be easily replaced, precisely because they are fixed with screws on the outside, and with wires inside the air conditioning unit circuit board.Air Conditioning Services Tucson AZ\nTucson AZ Air Conditioning Service


Sunday, 25-Aug-2013 04:14 Email | Share | | Bookmark
I Save A Bunch On E Cigs By Reading Through E Cigarette Reviews

Information gathered from these sources highlight a good number of characteristics that justify the pros and cons of using electronic cigarettes over conventional cigarettes. Based on clinical medicine, a stick of a typical cigarette contains more than 4000 components which are harmful to human's health. Find out who has the best shipping rates, which company is running a promotion, who has great pricing and other helpful information. For the convenience of those who might have sight problems or who are older, large print reviews are common. A good e cigarette review could attest to this improvement as many producers have been into tight competition. It's only been in the last five or six years or so that they've really caught on and gained popularity, and whether this is because of the benefits that e-cigarette reviews seem to rave about, or whether it's that the world started hanging up non-smoking signs on every door is debatable, but no matter what the reason is, there's no denying that there's something about e-cigarettes that have more and more people buying an e-cigarette kit out of curiosity, and more often than not, according to the e-cigarette reviews, people coming back and buying supplies to go with the parts that were in their original e-cigarette kit.For those new to the e cig game, look for e cigarette reviews that are light but also packed with information. The bad effect of using tobacco cigarette is a discussion of a lot of interest teams both online and offline. Competitors in the business will usually highlight the best features of their product over similar products in the market. Things like additional features, flavors and quality can be better or worse. Because tobacco was first found in the Americas, the world was without it for many centuries.Quenching your basic craving for nicotine gives you even more fulfillment. Ideally, a smoker will have to conduct some research first before delving into his first e cigarette purchase. E-cigarette manufacturers have their own sites by which individuals will gain access to e cigarette reviews to acquire necessary information regarding these new devices. Reading every electronic cigarette review can make you informed regarding different models and brands of e cigarettes. One of the things commonly written about in a cigarette reviews is the way the product is put together.Best Electronic Cigarette\nthe e cigarette


Thursday, 22-Aug-2013 16:43 Email | Share | | Bookmark
The Effective Way to Strengthen Your Core Muscles

The most common mistake that people do when shrugging is circling the shoulders, which is actually not a necessary. Doing clean and press is already a superset, for as long as you make sure that you shrug when performing clean and press so as to make use of the delts when you are lifting the bar overhead. Why limit your abilities, particularly as you age, by avoiding that which will make it easiest to perform these functions?The trapeziod work along with your arms, shoulders and your back and moves the shoulder blades when you perform shrugging, pushing forward and throwing. The deltoid muscle works by raising the arm away from your body and does this both in the front, as well as on the side and back area. The key to good core exercises is to apply an opposing force to your upper and lower body, and to force your core muscles to want to twist in opposite directions.But aside from performing all the shoulder muscles training exercises mentioned above, you should also be careful with your diet - eat right, and always eat healthy! First of all when I'm talking about weight training, I'm talking about getting HEAVY with it. Deltoid Training Another training exercise for building shoulder muscles is the deltoid training.what could you possibly be affecting with those little things anyway? The stronger you are, the easier you're going to find it to lift your child or a bag of groceries, reach to the top of your cabinet for a can of food, do housework, run to catch a light as you cross the street or any number of other real life functions that are just part of day to day activity. The glutius muscles - maximum, medius and minimus, are found in your rear.You'll be thrilled with the results. Running along the side of your waist are the obliques which are linked to the ribcage.There are several muscles which are classed as core muscles. Sexy, shapely legs?Here!\n Hyper Fuel 9x Reviews


Thursday, 22-Aug-2013 04:02 Email | Share | | Bookmark
Heating Elements for Hot Runner Mold Systems: Tubular Heaters

When choosing replacement parts for your furnace, cost should not be as critical as most companies make it. The cost of heating elements between a good manufacturer and a bad one is negotiable, as compared with the total investment. The production time and quality of the parts obtained by choosing a reputable manufacturer will more than make up for the difference. Keeping in mind the following suggestions when choosing a manufacturer will guarantee less downtime due to a defective item.

Manifold Heater and Cartridge Heater.

Cartridge heaters are utilized around the flow channel to guarantee uniform temperatures. It is necessary to keep the distance between the heaters and the manifold equal or greater than 1x the diameter of the heating element.

Thermocouple placement should be located equally distanced between the heating element and the flow channel, and should be set deep to guarantee a precise reading.

If an internal thermocouple is utilized, it is necessary to guarantee that it is located towards the center of the heating element, depending upon whether the controller is grounded or ungrounded.

Some of the most common reasons for failure include:

Lead short out.

This can be fixed by changing the lead type. If fiberglass leads were utilized, this could be the cause. Hot runners by nature create gases, which over time, saturate the fiberglass material, causing it to short out between the leads. Depending on the ambient temperature around the lead area, Teflon leads can be utilized to correct this, as they are more resistant to gases.

Internal thermocouple not reading correctly.

This can be caused by two different reasons. One reason is the thermocouple must be located in the center of the heating element. If not, you will never obtain a correct temperature of the flow channel. The other reason is whether or not the unit is grounded or ungrounded. Consult your controller manufacturer to determine this.Homepage\n


[<<  <  4  5  6  7  8  9  10  [11]  12  13  14  15  16  17  18  >  >>]    [Archive]

© Pidgin Technologies Ltd. 2016

ns4008464.ip-198-27-69.net